Masimo Radical Signal Extraction Instrukcja Operatora Pobierz pdf (Strona 16)

2-10 Radical-7 Color Display Signal Extraction Pulse Oximeter Operator’s Manual Radical-7 Color Display Signal Extraction Pulse Oximeter Operator’s Manual 2-11

system description

SYMBOLS

The following symbols are found on the back of the Radical-7 Pulse CO-Oximeter Docking

Station or packaging and are defined below:

NOTE:

Some of the interfaces and symbols are not available in all versions of the

Docking Station.

SYMBOLS DEFINITION

RS-232

SatShare Interface

Equipotential Ground Terminal

See Instructions for Use

Fuse Replacement

Analog Out Interface

Nurse Call Interface

WEEE Compliant

Mark of Conformity to European Medical Device Directive

93/42/EEC

Rx ONLY

Federal law restricts this device to sale by or on the order of a

physician (USA audiences only)

Underwriter's Laboratories Inc. approved

5%-95% RH

Storage humidity range: 5% to 95%

-40 C

+70 C

+1060 hPa - +500 hPa

95 mmHg - 375 mmHg

Storage temperature range: +70˚C to -40˚C

Storage altitude range: +1600hPa to +500hPa

Keep dry

Fragile/breakable, handle with care

system description

STANDALONE BACK PANEL

SERIAL OUTPUT

CONNECTOR

Use the Serial Output Connector with a ferrite bead installed

to connect a serial device, including a serial printer, RadNet

Interface Module or PC, to the Radical-7 Pulse CO-Oximeter.

The data is provided in standard RS-232C format. See

Section 7, Serial Interface Specifications. All external

device connections to the Serial Output Connector must be

IEC-60950 compliant.

ANALOG OUTPUT

/ NURSE CALL

CONNECTOR

Use the Analog Output Connector with a ferrite bead installed

to interface with an analog output device, such as a chart

recorder or nurse call system. All external device connections

to the Analog Output / Nurse Call Connector must be IEC-

60950 compliant.

SATSHARE CABLE

CONNECTOR

Use the SatShare Cable Connector to connect a SatShare cable

to the SpO

input connector of a multiparameter patient monitor.

All external device connections to the SatShare Cable Connector

must be IEC-60601-1-1 compliant. SatShare cables are available to

interface with most major multiparameter patient monitors. Check the

label on the SatShare cable and the SatShare Directions for Use to

ensure that the correct cable is used for each type of patient monitor.

Refer to Section 10 - Accessories of this manual or the Masimo web

site at www.masimo.com for the latest SatShare cables and validated

instruments.

POWER ENTRY

MODULE

The power entry module contains the input connector for AC

power and two fuses. The AC input provides power to the sys-

tem from the AC line. Always connect the Pulse CO-Oximeter

to the mains power for continuous operation and/or battery

recharging.

NOTE: Use the power cord as the means to disconnect the

device from the mains power supply.

EQUIPOTENTIAL

GROUND

CONNECTOR

Use the Equipotential Ground Connector for grounding.

5 4

P2 P3

Manufactured by:

Masimo Corporation

Irvine, CA 92618 USA

Made in USA

Rx Only

Covered by one or more of the following U.S. Patents: RE38,492, RE38,476,

6,850,787, 6,826,419, 6,816,741, 6,699,194, 6,684,090, 6,658,276, 6,654,624,

6,650,917, 6,643,530, 6,606,511, 6,584,336, 6,501,975, 6,463,311, 6,430,525,

6,360,114, 6,263,222, 6,236,872, 6,229,856, 6,206,830, 6,157,850, 6,067,462,

6,011,986, 6,002,952, 5,919,134, 5,823,950, 5,769,785, 5,758,644, 5,685,299,

5,632,272, 5,490,505, 5,482,036, international equivalents, or one or more of the

patents referenced at www.masimo.com/patents. Products containing Satshare®

P1P1

MEDICAL ELECTRICAL EQUIPMENT

UL 60601-1/CAN/CSA C22.2 No. 601.1

80FK

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 54 55

Komentarze do niniejszej Instrukcji

Brak uwag

Masimo Radical Signal Extraction Instrukcja Operatora Strona 16

Komentarze do niniejszej Instrukcji