Masimo Radical Signal Extraction Instrukcja Operatora Pobierz pdf (Strona 59)

Radical Signal Extraction Pulse Oximeter Operator’s Manual 49

specifications

ENVIRONMENTAL

Operating Temperature: 41

F to 104

F (5

C to 40

Storage Temperature: -40

F to 158

F (-40

C to +70

Operating Humidity: 5% to 95%, non-condensing

Operating Altitude: 1060 mbar to 500 mbar pressure,

-1000 ft to 18,000 ft (-304 m to 5,486 m)

PHYSICAL CHARACTERISTICS

dimensions

Handheld: 8.9” x 3.3” x 2.1” (22.6 cm x 8.4cm x 5.3 cm)

Standalone: 3.5” x 10.5” x 7.7” (8.9 cm x 26.7cm x 19.6cm)

weight

Handheld: 1.3 lbs. (0.59 kg)

Docking Station (RDS-1, RDS-2, RDS-3): 2.5 lbs. (1.14 kg)

Docking Station (RD-1B, RDS-3B): 4.11 lbs (1.86 kg)

Standalone (RDS-1, RDS-2, RDS-3): 3.8 lbs. (1.73 kg)

Standalone (RDS-1B, RDS-3B): 5.4 lbs. (2.45 kg)

trending

72 hours of trending at 2 second resolution, up to 30 days of trending at 10 second resolution , output

to serial printer or other serial devices

modes

Averaging mode: 2, 4, 8,10, 12, 14 or 16 seconds

Sensitivity: Normal and Maximum

alarms

Audible and visual alarms for high low saturation and pulse rate (SpO

range 1-100%, pulse rate

range 25-240 bpm)

Sensor condition, system failure and low battery alarms

High Priority: 571 Hz tone, 5 pulse burst, pulse spacing: 0.250s,

0.250s, 0.500s, 0.250s, repeat time:10s

Low Priority: 500Hz tone, 1 pulse, repeat time: 5s

Alarm Muted reminder: 500Hz tone, 2 pulse burst, pulse spacing 0.375s, repeat time: 3min.

display/Indicators

Data display: %SpO

, pulse rate, pleth waveform, alarm

status, trends, status messages, Signal IQ and perfusion index

Type: Backlit LCD

Pixels: 480 x 160 dots

Dot Pitch: 0.25 mm

output interface

SatShare (RDS-1, RDS-1B),

Serial RS-232, Analog Output, Nurse Call (RDS-1, RDS-1B, RDS-3, RDS-3B)

HP Vuelink, Spacelabs Universal Flexport (RDS-1, RDS-1B, RDS-3, RDS-3B)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Masimo Radical Signal Extraction Instrukcja Operatora Strona 59

Komentarze do niniejszej Instrukcji